How to Install Window Blinds in 6 Easy Steps
Not sure if you can install your window blinds on your own? Accugine Window Blinds believe you got this!
If you want to save on cost, we have here a step-by-step instruction for you to follow. Don’t worry, we made it simple so you can do it by yourself. Less expenses and less hassle!
Here are the materials you will be needing:
Steel Tape Measure
Pencil (For marking)
Electric Drill
Screws and screw driver
Brackets (2 per blinds)
Purchased package
Here are the steps for the installation of window blinds:
Step 1: Open the package and measure the width of the blinds to make sure that it is the correct one for your window (especially if you’re buying several blinds from us)
Step 2: Place the bracket (inside or outside the window opening, see below instructions) and mark where your drilling points will be
For inside mounted
Place the bracket at the top corner of each side
Mark and trace the holes
For outside mounted
If your headrail is Combi Valence and Roll up: Mark about 1 and 1/8 inch from the top left edge of the window.
If your headrail is Acetate Valence: Mark about 1 and 3/4 inch from the top left edge of the window.
Place the bottom edge of bracket on the line mark you just made
Mark and trace the holes
Repeat on the right side
U and L Brackets attachment:
Step 3: Drill holes for the screw (two per each bracket)
Step 4: Align the bracket with the holes then drive the screw for attachment
Step 5: Attach the U-Bracket
Step 6: Put the head rail into the bracket
And you’re all set! Pretty easy right? If you need visual instructions, we have here photos taken from the actual installation of blinds in one of the condo units here in the Philippines:
BLINDS INSTALLATION
But if you’re still not sure you can make it, or you don’t have the time and tools to do it on your own, just call us and we can install the blinds for you. We offer our installation service in Metro Manila and Laguna, Philippines.
If you have concerns and questions just comment them down below or message us and we’ll be here to answer your queries.